其實就是讀注冊表，不過如果能獲得機器的IP配置等信息，以后配置IIS時就簡單了。
下面的腳本讀出機器的所有可用IP地址，子網掩碼，卻省網關等信息：

Option Explicit
Dim WSHShell
Dim sNic, sMan
Dim Gateway
Dim IPAddress
Dim SubnetMask
Dim i

Dim sTcpipRegKey
Dim bIsDHCP

Set WSHShell = CreateObject("WScript.Shell")

sNic = WSHShell.RegRead("HKLM\SOFTWARE\Microsoft\Windows NT\
CurrentVersion\NetworkCards\1\ServiceName")

If sTcpipRegKey <> "Microsoft" And Err.Number = 0 Then

sTcpipRegKey = "HKLM\SYSTEM\CurrentControlSet\Services\"
& sNic & "\Parameters\Tcpip\"

bIsDHCP = WSHShell.RegRead(sTcpipRegKey & "EnableDHCP")
If bIsDHCP Then
Gateway = WSHShell.RegRead(sTcpipRegKey & "DhcpDefaultGateway")
IPAddress = WSHShell.RegRead(sTcpipRegKey & "DhcpIPAddress")
SubnetMask = WSHShell.RegRead(sTcpipRegKey & "DhcpSubnetMask")
MsgBox ("DefaultGateway: " & Gateway(0) & Chr(10) & Chr(13)
& "IPAddress: " & IPAddress & Chr(10) & Chr(13) & "SubnetMask: " & SubnetMask)
Else
Gateway = WSHShell.RegRead(sTcpipRegKey & "DefaultGateway")
IPAddress = WSHShell.RegRead(sTcpipRegKey & "IPAddress")
SubnetMask = WSHShell.RegRead(sTcpipRegKey & "SubnetMask")
For i=0 to Ubound(IPAddress)-1
MsgBox ("DefaultGateway: " & Gateway(0) & Chr(10) & Chr(13)
& "IPAddress: " & IPAddress(i) & Chr(10) & Chr(13) & "SubnetMask: "
& SubnetMask(i))
Next
End If
End If

說明：機器的網絡配置保存在注冊表里，網卡項目下面，所以首先必須知道網卡的名字。然后取注冊表數據，IP地址和子
網掩碼都是數組形式（其實注冊表里保存的是二進制數據，VBSCRIPT幫我們轉換了）。在WSH里讀注冊表非常的簡單，具體
請看上面的程序。